The plant operates in automatic mode in accordance with the single button principle. The operator needs to choose grade of concrete (M50 ... M500) and its amount for loading, and to press the button to start the cycle.
PA 2.0 control panel of the plant is located in a comfortable operator’s compartment with inspection windows which can be in-frame or stand near the plant.
All equipment is installed on a reinforced mounting frame which is placed on a level ground. No foundation or skip pit needed.
Twin-shaft concrete mixer is mounted on a platform. Discharge height - 4 m. The concrete mixer is equipped with a skip for mixture hoisting and feeding.
DKM-36 batching complex is used for inert materials storage and batching. There are three hoppers of 12 cu m each. Total capacity is 36 cu m. A dispensing conveyor belt where component batching is performed is installed under the hoppers. Components are fed from the hoppers by opening of Camozzi pneumatically operated gates (Italy). Upon achievement of the required batch of inert materials, the conveyor is turned on, and inert materials are fed into the skip that hoists the components to the concrete mixer.
The cement is stored in a special warehouse - cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Силосы цемента, обвязка для силоса и шнеки всегда в наличии на складе в Златоусте! Производитель “SCUTTI” (Италия)
Cement, water and chemical additives are batched in BD-45 block if dispensers. Cement is batched in cement dispenser with maximum dosage 450 kg.
Water is batched in water dispenser with maximum dosage 250 litres. Also chemical additives are dispensed in 30 litres dispenser.
All components of the mixture are mixed; upon achievement of required homogeneity of the mixture, Camozzi pneumatically operated gate is opened, and the mixture is discharged into a concrete mixer lorry or a receiving hopper. Then the cycle is repeated.
One cycle lasts for 55-60 seconds during which 0.8 cu m of ready-to-use concrete is produced.
Возможна поставка бетонного завода в защитном покрытии цинк. Покрытие наносится методом холодного цинкования.