Batching Complexes

Filter:

Showing all 14 results

Dosing complex DKP-10

6 013 672 ₸

including VAT 12%
  • The total volume of bunkers, the cube. m. 10
  • The volume of the hopper, the cube. m. 5
  • The number of bins, pieces. 2
  • The maximum dose weighing kg to 1200
  • Batching error,% ±1
  • Belt speed, m c 1,3
  • The pressure in the pneumatic system, MPa 0,6
Dosing complex DKS-16

8 914 892 ₸

8 586 667 ₸

- Discount -4%
including VAT 12%
  • The total volume of bunkers, the cube. m. 16
  • The volume of the hopper, the cube. m. 8
  • The number of bins, pieces. 2
  • The maximum dose weighing kg to 1500
  • Batching error,% ±1
  • Belt speed, m c 1
  • The pressure in the pneumatic system, MPa 0,6
Dosing complex DKT-16

12 030 564 ₸

including VAT 12%
  • The total volume of bunkers, the cube. m. 16
  • The volume of the hopper, the cube. m. 8
  • The number of bins, pieces. 2
  • The maximum dose weighing kg to 1500
  • Batching error,% ±1
  • Belt speed, m c 1
  • The pressure in the pneumatic system, MPa 0,6
DKS-24 Dosing complex

11 282 236 ₸

11 001 667 ₸

- Discount -2%
including VAT 12%
  • The total volume of bunkers, the cube. m. 24
  • The volume of the hopper, the cube. m. 8
  • The number of bins, pieces. 3
  • The maximum dose weighing kg to 2000
  • Batching error,% ±1
  • Belt speed, m c 1
  • The pressure in the pneumatic system, MPa 0,6
Dosing complex DKT-24

15 224 804 ₸

including VAT 12%
  • The total volume of bunkers, the cube. m. 24
  • The volume of the hopper, the cube. m. 8
  • The number of bins, pieces. 3
  • The maximum dose weighing kg to 2000
  • Batching error,% ±1
  • Belt speed, m c 1
  • The pressure in the pneumatic system, MPa 0,6
Dosing complex DKT-32

17 856 188 ₸

including VAT 12%
  • Total volume of bunkers, m³ 32
  • Volume of one bunker, m³ 8
  • The number of bins, pieces. 4
  • Belt conveyor drive power, kW 11
  • The width of the conveyor belt, mm 800
  • Conveyor inclination angle, ° 4,5
  • Belt speed, m/s 1,3
Dosing complex DKS-32

14 540 876 ₸

including VAT 12%
  • Total volume of bunkers, m³ 32
  • Volume of one bunker, m³ 8
  • The number of bins, pieces. 4
  • The maximum dose weighing kg 14 910 $
  • Batching error,% ±1
  • Belt speed, m c 1
  • The pressure in the pneumatic system, MPa 0,6
17 654

26 682 208 ₸

including VAT 12%
  • Vibrator power, kW 5
  • Vibrator power, kW 8
  • Vibrator power, kW 2,2
  • Vibrator power, kW 500
  • Maximum productivity of the belt feeder, t/h Operating thermal power of the burner, MW
  • Maximum productivity of the belt feeder, t/h 0Vibrator power, kW
  • Maximum productivity of the belt feeder, t/h 7.5
Dosing complex DCM-40

14 665 812 ₸

including VAT 12%
  • Total volume of bunkers, m³ 40
  • Volume of one bunker, m³ 20
  • Vibrator power, kW 2
  • The maximum dose weighing kg 14 910 $
  • Batching error,% ±1
  • Belt speed, m c 1,9
  • The pressure in the pneumatic system, MPa 0,6...0,8
Dosing complex DCM-60

18 410 028 ₸

including VAT 12%
  • The total volume of bunkers, the cube. m. 60
  • The volume of the hopper, the cube. m. 20
  • The number of bins, pieces. 3
  • The maximum dose weighing kg up to 4500
  • Batching error,% ±1
  • Belt speed, m c 1,9
  • The pressure in the pneumatic system, MPa 0,6...0,8
Dosing complex DCM-80

24 361 232 ₸

including VAT 12%
  • Total volume of bunkers, m³ 80
  • Volume of one bunker, m³ 20
  • Vibrator power, kW 4
  • The maximum dose weighing kg 6000
  • Batching error,% ±1
  • Belt speed, m c 1,9
  • The pressure in the pneumatic system, MPa 0,6...0,8
Dosing complex DKM-120

30 427 068 ₸

22 540 000 ₸

- 26% discount
including VAT 12%
  • Total volume of bunkers, m³ 120
  • Volume of one bunker, m³ 30
  • Vibrator power, kW 4
  • Batching error,% ±1
  • Belt speed, m/s 1,4
  • The pressure in the pneumatic system, MPa 0,6...0,8
  • Aggregate size, mm max 70

Dosing complexes concrete plants ZZBO

Performance of a concrete plant and the quality of its products - branded concrete mix - depends not only on the technical characteristics of the mixer, and the exact dosage of concrete components, as well as the feed rate into the mixer for further mixing.

Purpose metering systems

В число компонентов бетона входят так называемые инертные заполнители – песок, гравий, щебень, песчано-гравийная смесь, керамзит, отсев и другие насыпные материалы. Для хранения инертных материалов (далее – ИМ) отводятся значительные территории, поскольку их нередко поставляют целыми эшелонами. Обычно ИМ складируют под открытым небом, в лучшем случае – под навесом. Естественно, что на рабочей площадке БСУ необходимо обустраивать специальные участки, на которых бы определенные объемы песка, щебня и других ИМ, задействованных в техпроцессе, временно складировались и уже с этих участков напрямую «включались» в технологическую цепочку. На современных бетонных заводах этим целям служат дозирующие комплексы (далее – ДК) бункерного типа, выполняющие следующие функции:

  1. Temporary accumulation and storage of a small stock of MI, ensuring continuity of production.
  2. Defrosting, drying and MI heating in autumn and winter with year-round operation.
  3. The weight IM dosing according to the selected recipe of the concrete mix.

The composition and operation of the DC production ZZBO

Dosing ZZBO complexes consist of the following elements:

  • bins volume from 5 to 12 and a cube. meters for the storage of inert materials;
  • supporting frame for placing and fixing elements DK;
  • dispenser inert conveyor type;
  • sector gate opening hoppers bins;
  • pneumatic equipment;
  • vibrators-shakers);
  • S-type steel strain gauges;
  • пульта управления ДК в полуавтоматическом режиме, когда оператор нажатиями соответствующих кнопок управляет открываниями затворов бункеров и контролирует по соответствующему табло процесс дозировки. В настоящее время ZZBO может поставлять ДК с автоматическим пультом управления для работы ДК в автоматическом режиме.

In preparation for the winter season hopper equipped with DC registers liner steam from the steam generator or air ducts for hot air from the heat source.

Загрузку ИМ со стационарных складов осуществляют ковшовым погрузчиком. Каждый тип сырья отгружается только в свой бункер. Смешивание в бункере двух типов сырья не допускается.

Feeder-conveyor is suspended on the 4-S-type load cells, which provides a more accurate indication of parameters in comparison with the Chinese outdoor counterparts.

Work dosing process takes place in the following sequence:

  1. On operator command (or the remote automatic control), inert fillers of each bin in accordance with the prescription in doses received through the output gates to a tape dispenser, conveyor.
  2. Feed each of them to produce portions while weighing.
  3. With the accumulation of the required weight on the belt conveyor moves all the components of aggregates in the bucket or skip to the tape feed ingredients in the mixer.
  4. Further, the duty cycle is repeated a number of times.