The work of the concrete plant COMPACT-45 takes place in automatic mode in accordance with the single button principle. The operator needs to choose grade of concrete (M50 ... M500) and its quantity to be loaded into the mixer truck, press the “cycle start” button.

PA-3.0 SCADA-5.0 control panel with monoblock located in the operator's cabin, which can be installed to work in two different positions: 1) transport (built into the frame), or 2) next to the concrete plant, any place convenient for installation.

All components of the plant are mounted on a frame, which is installed on a flat area, No foundation or skip pit needed.

Twin-shaft concrete mixer is mounted on a platform. Discharge height - 4 m. The concrete mixer is equipped with a skip for mixture hoisting and feeding.

DKM-36 batching complex is used for inert materials storage and batching. There are three hoppers of 12 cu m each. Total capacity is 36 cu m. . A dosing belt conveyor is installed under the bunkers, on which components are dispensed; the components are supplied from the bunkers by opening pneumatic valves. When the required dose of inerts has been collected, the conveyor is turned on and the inerts are fed into a skip, which lifts the components into the concrete mixer.

Cement is stored in a special warehouse - a cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.

Cement silos, silo piping and augers are always in stock at the ZZBO warehouse in Zlatoust!

Cement, water and chemical additives are batched in BD-45 block if dispensers. Cement is batched in cement dispenser with maximum dosage 450 kg.

Water and chem. additives are dosed with dispenser unit BD-45.

ZZBO is the official dealer of SICOMA concrete mixers in Russia and the CIS!
It is possible to supply a concrete plant with a concrete mixer from the manufacturer SICOMA.

There is a mixing of all components of the mixture, after obtaining the necessary homogeneity of the mixture, the pneumatic gate opens and the mixture is unloaded into a concrete mixer truck or a receiving hopper.

One cycle lasts for 55-60 seconds , in one cycle 0.8 cubic meters of the finished mixture is produced.

Technical Features

• Capacity, cu m per hour 35...45
• Режим работы автомат по принципу "одна кнопка"
• Twin-shaft concrete mixer BP-2G-1200s
• Hoppers (number of x capacity, cu m) 3 x 12 = 36
• Silo capacity (optional), tons from 22
• Design summer
• Load of inert materials into the concrete mixer skip
• Total power, kW 70
• Sector gate, pneumatic control
• Dimensions of the basic configuration:
• Weight, kg 16900
• Height, mm 8128
• Width, mm 3,600
• Length, mm 16325