LENTA-54 Concrete Plant
54 733 952 ₸




Enquire conditions
and delivery time

We'll call you back within 15 minutes

Specify your requirements

Send prices and terms of delivery
13 806 520 ₸
- BP-2G-1200 Twin-shaft concrete mixer
- Pneumatic seal - double
- Connection set for pneumatic equipment
- Armor shift flake type. Material: cast iron wear 15 mm
- Спицы усиленные (стальное литье) крепление типа "кулак"
- Changeable blades. Material: ЧХ16Н2Т cast iron (chromic high alloy wear-resistant)
- Electricity to connect the remote control
- Maintenance kit (three armor, blade, needle)
- Concrete mixer machinery certificate
7 355 712 ₸
- Belt conveyor assembly: 18 m long, 800 mm wide
- Drive: 15 kW gear motor
- Receiving hopper
- Mounting frame. 25 degrees inclination
- The drum leader. ⌀ 420 mm, width 950 mm
- The drum is driven. ⌀ 400 mm, width 950 mm
- Chevron belt, thickness - 8 mm
- Docking lock “BARGER” (Russia)
- The roller support is grooved (paint and varnish coating). ⌀ 60 mm
- Supporting rollers. ⌀ 60 mm
- Guide rollers. ⌀ 60 mm
- Passport and instruction manual for the conveyor
4 044 768 ₸
- Overpass EL 1200.00.00.000. Reinforced structure adapted for unloading concrete at a height of 4,000 mm
- mixer platform with supporting structures
- Ladders for equipment maintenance
- Fence along the perimeter
- Staircase with handrails
- Funnel for unloading concrete with rubber guide
- Fastening construction for pipes and electric cables
- Hardware for the assembly trestle
- Coating: shotblasting, double coloration with drying chamber
- Total weight - 2080 kg
15 727 712 ₸
- Bunkers-inert (2x20). Total volume 40 m³
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 4 pcs.
- Pneumatic equipment - 4 electric pneumatic distributors, a set of fittings and tubes, 4 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE3003 - 4 pcs.
- The support frame, installation without foundation
- Inert batcher DI-6 (conveyor) with lined drive drum. Drive power 18.5 kW
- Zink plated rollers
- S-shaped load cells for 2 tons - 4 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
4 573 296 ₸
- Support frame (powder coated)
- Cement dispenser, dosage - 500 kg (powder coating):
- Three inlet pipes for augers (two are covered with a lid)
- Connecting outer sheath with collar clamps
- Overpressure system
- Unloading disc damper ∅200
- Strain gauges - 3 pcs.
- Signal amplifier - weight sensor
- Pneumatic distributors - 4 pcs.
- Vibrator MVE41 - 1 pc.
- Water dispenser, dosage - 250 liters (powder coating):
- Strain gauges - 3 pcs.
- Water dump pump
- Signal amplifier - weight sensor
- Chemical additives dispenser, dosage - 30 liters, made of stainless steel:
- Strain gauges - 2 pcs.
- Ball pneumatic valve ∅25 - 1 pc.
- Ball pneumatic valve ∅50 – 2 pcs.
- Signal amplifier - weight sensor
5 901 168 ₸
- Software on your own SCADA system complete with a monoblock: accounting for the consumption of materials and equipment operation, remote access and control over the work in the local network
- Automatic operation by pressing "one" button
- Recipe storage database for concrete production
- Programmable Logic Controller
- Сontrol panel case protection - IP54
- Power cabinet case protection - IP54
- Control, protective and switching equipment "Omron", "Siemens"
- Set of diagrams and instruction manual
- Hardware for assembly RBU: metering complex overpass screw silage
- Hardware, accessories
- Wire for screw fixing
- Kit for connecting the database (pnevmotruba, sleeves, bends, RVC 51-70 clamps, duct PVC-5-C-60)
- Limit switch for the database
- Kit vodopodvedeniya (pipe bends, sleeves, T-joints, anchor bolts, brackets)
- Kit RBU pneumatic (air tubing, pnevmotruba, fittings, hardware)
- Set of cables
- Couplings (5 titles)
- compactor
- Acid sealant TempPlus
- Power and control cables, protected by metal hose (in mobile plants they are laid in frame)
- Set of locking sensors and executing mechanisms position sensors (skip, mixer's gate, etc.)
17 177 160 ₸
- Planetary concrete mixer MPC 1125
- Mixer drive - 40 kW
- Replaceable wear-resistant armor made of cast iron with a strength of 500HB
- Sector valve with rubber seal equipped with hydraulic drive valve with hydraulic drive and oil station
- Inspection hatches are equipped with an access security system
19 915 896 ₸
- Aggregate bins (3 x 20). Total volume 60 m³
- Preparation under registers installation for heating inert materials
- Sector valves, with control of pneumatic cylinders - 6 pcs.
- Pneumatic equipment - 6 electro-pneumatic distributors, a set of fittings and tubes, 6 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE3003 - 6 pcs.
- The support frame, installation without foundation
- Dispenser inert CI-9 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Zink plated rollers
- S-shaped load cells for 2 tons - 4 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
25 877 488 ₸
- Bunkers of inert BI-80 (4 x 20) - 8 sections. The total volume is 80 cubic meters. meters
- Preparation under registers installation for heating inert materials
- Pneumatic equipment - 8 electric pneumatic distributors, a set of fittings and tubes, 8 quick exhaust valves, 1 pneumatic regulator, a filter with a pressure gauge
- Vibrator MVE 300/3 - 8 pcs.
- Dispenser inert CI-12 (conveyor) with the lined drive drum. Drive power 18,5 kW
- Strain gauges - 6 pcs.
- CAS connecting box
- Signal amplifier - weight sensor
- Passport to complex metering and purchased products
4 131 400 ₸
- Silo tank (V = 28 m3)
- Mounting frame
- Stairs
- Cover protection enclosure
- Loading pipe d 102 with connection lock
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Machinery certificate
286 832 ₸
- The pump Calpeda MXH 202E assembled for chemical supply. additives
- Capacity - 80 liters/min
- Power - 0.33 kW
- Weight - 6.9 kg with packaging
- Machinery certificate
1 189 552 ₸
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- One window (PVC, double glazing), insulated door with lock
- Lighting
- Slinging loops
- Weight - 180 kg
1 218 672 ₸
- Grate for a 100x100 bunker section for DKM-40-DKM-40.30.000-01-T
- Lattice for hopper section 70x70 for DKM-36 - DKM-36.10.000
2 617 160 ₸
- Operator's cabin. Sheathed by zinc-coated painted profiled sheeting, finishing accessories, moisture protecting impregnation
- Frame protected against corrosion, 60 mm thick heat insulation
- Sound insulation, protection against rain
- Two viewing windows (PVC, double glazed windows), insulated door with lock
- Lighting
- Air conditioning
- Operator table
- Operator's chair
- Heater 2kW
- Slinging loops
- Weight 280 kg
- Cement filter AIRFILL25 assembly (Turkey) in a rigid package
- Cartridges pneumatic cleaning system
- Adjusting ring
- Operational documentation
- Airfill v25 cement filter with a vibration cleaning (Türkiye)
- Adjusting ring
- Operational documentation
- Cement filter with vibration cleaning FCS-24 NEON assembled
- Filter elements - 14 pieces
- Stainless alloy steel body
- Vibrator - cartridge vibration cleaning system
- Silage setting ring
- Lid
- Machinery certificate
146 328 ₸
- Emergency pressure relief valve PV273 assy
- Adjusting ring
- Operational documentation
77 168 ₸
- Cement level sensor G2 1/2 220V assy in a package
- Adjusting ring
- Operational documentation
128 128 ₸
- Butterfly valve DN300
- Handle for gate control
- Operational documentation
6 646 640 ₸
- Silo Tank (V = 50 m3): cover - 4 sectors, cylindrical section - 12 sectors, large cone - 4 sectors, small cone
- Mounting frame
- Stairs
- Cover protection enclosure - 11 sectors
- Loading pipe d 102 with connection lock
- Inspection hatch (Viewing window for inspection and cleaning of the cone)
- Connecting flanges for installation cement filter emergency valve, level sensors, aeration and vibrator
- Shot peening prior to application to the extent Sa 2 1/2 GOST P ISO 8501-1-2014
- Anti-corrosion protection is made with a two-component primer-enamel PentriProtect PUR 700 based on polyurethane-acrylic resin in the ATIS spray booth
- Frame for transportation
- Hardware for the assembly of a silo
- Polyurethane sealant Soudaflex FC 40 gray 600ml - 9 tubes
- Machinery certificate
3 059 056 ₸
- Auger assembly
- Pipe Diameter 219 mm Pipe Length 11 500 mm
- Drive: motor-reducer. Power 11 kW
- Inspection window for cleaning and maintenance
- Operational documentation
CBP operation mode - fully automatic mode, on the principle of "single button".
BP-2G-1200 Twin-shaft concrete mixer is installed on the elevated structure with the discharge height - 4 m. LENTA-54 concrete mixing plant is equipped with a chevron belt conveyor for lifting and loading of the aggregates into the mixer.
ZZBO is the official dealer of SICOMA concrete mixers in Russia and the CIS!
It is possible to supply a concrete plant with a concrete mixer from the manufacturer SICOMA.
For storage and precise batching of the inert materials dosing complex DKM-40. It is possible to supply bunkers of increased volume (up to 72 cubic meters). Inert are loaded and stored in bunkers, the number of bunkers 2 each 20 cubic meters. meters, the total volume of bunkers is 40 cubic meters. meters. Under the bunkers, a conveyor conveyor is installed under which accurate dosing of the components occurs, the components are supplied from the bunkers by opening the gate shutters, the damper is controlled by the pneumatic system.
Upon achievement of the required batch of the inert materials, the conveyor is turned on and they are discharged into the belt conveyor's receiving hopper and after that into the mixer.
Protect inert materials from precipitation using Shelter of the strip conveyor!
The cement is stored in a special warehouse - cement silo (not included in the basic package). Silos for cement must be selected the rate of two daily stock performance. For feeding cement from a cement silo dispenser must acquire the correct length screw.
Cement silos, silo piping and augers are always in stock in Zlatoust!
Using cement is fed into the screw BD-45 block of dispenserswhich consists of a 500 kg cement dispenser, 250 liters and a 32 -liter -liter chemical additive dispenser. Each dispenser is located on three high -precision tensodes and a hard frame, which increases the accuracy of dosing. The cement dispenser is equipped with the MVE 300/3 vibrator to encourage cement mating when he is sticking.
All components of the mixture are mixed, after obtaining the necessary homogeneity of the mixture, the pneumatic valve of the concrete mixer is opened and the mixture is supplied to the concrete mixer truck or receiving hopper.
Then the cycle is repeated.
One cycle lasts for about 50 seconds during which 0.8 cu m of ready-to-use concrete is produced. LENTA-54 capacity is 35-54 cu m per hour of operation.
- Capacity up to 54 cu m per hour
- Twin-shaft concrete mixer with belt conveyor
- Software on its own SCADA system complete with a monoblock: accounting for the consumption of materials and equipment operation, remote access and control over the work
- Transportation in two eurofuras to the installation site
- 2 year full warranty
Technical Features
- Capacity, cu m per hour 35...54
- Automatic operating mode
- BP-2G-1200 Concrete mixer
- Bunkers (number x volume m3) 2 x 20
- Silo capacity (optional), tons 22...315
- Pneumatic equipment (Italy) CAMOZZI
- ABAC Pole Position L20P Compressor (Italy) ABAC
- Design summer
- Load of inert materials into the concrete mixer belt conveyor
- Total power, kW 66.3
- Sector gate, pneumatic control
- Dimensions of the basic configuration:
- Weight, kg 15900
- Height, mm 8019
- Width, mm 3700
- Length, mm 26903

Quality
certificates

Products
in stock

Individual configuration
with prices for each item

Mobile
commissioning
available

Worldwide
delivery
in trucks or containers
Geography of supplies 2011-2024
Own production, in-stock products and
professional team allow us guarantee
most competitive prices, shortest
possible delivery time and high-quality goods
Call hotline in Kazakhstan
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: 010000, Kazakhstan, Akmola region,
г. Astana, prospekt Akžol, Zdanie 44, of. 32
e-mail: sales@zzbo.ru

Artem Kononovich
Director of the branch in Kazakhstan
Phone: +7 (7172) 760-141
e-mail: sales@zzbo.kz
Place your order
We will send you the price,
conditions and terms of delivery

Response within 1 hour

You will get the offer with
individual delivery and payment conditions