On-site MCP-20 mobile concrete plant, with a productivity of 20 m³ of concrete per hour of operation.

Перевозка в 1-ом 20 тонном контейнере или 5 тонном грузовике. Габариты длина 4,4 метра, ширина 2 метра и высота в транспортном положении 2,4 метра. Вес 4 тонны.

The plant is supplied already fully ready for use, does not require any makeready, checkout or foundation construction.
Installed on an open area, on any dense surface or in a workshop minimum 4 meters height.

Start-up: connection to 380 V voltage supply and water feed. It takes less than two hours!

The principle of automatic operation:

• Инертные (песок, отсев, щебень и прочее), которые будут использоваться в производстве бетонараствора, распределяются по отсекам бункера инертных по наименованию. Количество бункеров равняется 2 шт. Таким же образом, распределяются по классу цемент в силосе, вода и добавочные вещества в расходные баки.
• After selecting a specific concrete recipe, the required volume (m³) is entered. After that, the plant starts production.
• Inert materials are batched separately according to set weight. The batching is performed on the belt conveyor on which they are fed by opening of the hopper's gate.
• Dosed inert by means of a weight conveyor are fed into the concrete mixer.
• Cement, water and various chemical additives are fed to the corresponding dispensers where they are weighted according to the formula specified in the automation system.
• After dosing of all components of the concrete turns the solution through a metering valve fed into the mixer.
• The mixture of all components in the mixer is stirred for a certain time and a concrete solution is supplied through the drain valve mixer.

BP-1G-500 single-shaft concrete mixer

Volume 500 liters. Positive concrete mixer with one horizontal shaft. 6 paddles for mixing. 11 kW drive. Rotation speed - 30 rot/min.

6 mm thick paddles made of wear-resistant cast iron, adjustable for gap aligning.

The armor is also made of wear-resistant cast iron 10 mm thick, replaceable, bolted. Warranty period until wear is at least 2 years or 40,000 cubic meters of concrete.

Unloading is done through a pneumatic seal.

In one cycle, 0.33 m³ of concrete is produced. The cycle lasts less than a minute. Thus, 1 m³ of concrete is produced in three minutes of plant operation. Post-20.

ZZBO is the official dealer of SICOMA concrete mixers in Russia and the CIS!
It is possible to supply a concrete plant with a concrete mixer from the manufacturer SICOMA.

DK-8 Batching Complex

Has a large capacity of 8 m³ of inert materials. These are two bins with a volume of 4 cubic meters.
A distinctive feature is loading with any front loader from one side of the bunker.
Large hopper loading width - 2.9 meters.
Loading height only 2.8 meters, no additional ramp needed.
The conveyor is equipped with chevron belt and lined drum.
Weight conveyor, on suspended load cells. Dosing error 1%. Conveyor drive power 7.5 kW.
The hoppers are equipped with two Camozzi pneumatic valves and two MVE 300/3 shaker vibrators.

BD-15 Block of Dispensers

The hoppers are fitted with two Camozzi pneumatic valves and two Oli shaker vibrators.
Дозатор цемента на 150 кг снабжен пневматической заслонкой Camozzi, и вибратором встряхивателем MVE 300/3. Дозатор весовой расположен на трех тензодатчиках.
Весовой дозатор воды на 75 литров, на трех высокоточных тензодатчкиках
Chemical additives dispenser is made of stainless steel. Water and chemical additives dispensers are equipped with pneumatically operated gates.

Compressed air system compressor B5200B/200 CT4

Consists of a piston compressor Compressor B5200B/200 CT4 and a pneumatic system. Capacity 530 liters per minute, power 3 kW. Pressure 10 atm. The compressor is already built into the frame and is protected from the external environment and dust.

PAM remote control

Work on the principle of pressing one button, select the brand of concrete - the amount of concrete and press the start of the cycle! Controller and touch graphic control panel.

Productivity 20 m³ / h for ready-made concrete (in continuous operation, with recipes with 2 aggregate components, 1 binder component (its maximum mass is 300 kg per 1 m³ of concrete), with normal fluidity, 5% sand moisture, water / cement ratio equal to 0.5, with 30 seconds stirring and positive ambient temperature.

Discharge of ready mix into a bucket.

Technical Features

• Productivity, m³ per hour 10...20
• Volume of bunkers, m³ 8 (2 x 4)
• Concrete mixer BP-1G-500S
• Total power, kW 27
• Weight, kg 5380
• Voltage, V 380
• Dimensions of the transport, mm 6600x2410x4070
• Height hoppers, mm 2840
• Maximum height in the operating position, mm 4070
• Width, mm 2410
• Length, mm 6600