Бетонный завод SMART-20 0.0-24 (2х12)
23 754 024 ₸
Enquire conditions
and delivery time
We'll call you back within 15 minutes
Specify your requirements
Send prices and terms of delivery
BP-1G-500 single-shaft concrete mixer |
Mounting Frame |
Dosing complex DKT-24S |
BD-15 Block of Dispensers |
Compressor SB4/C-200.LB30-3.0 |
PAM 4.0 SCADA control panel |
Set for assembly and connection |
Screw conveyor ⌀168/4,000 |
Twin-shaft concrete mixer BP-2G-375 |
Planetary counter-current concrete mixer BPP-3V-375 |
Rastarivatel big bags with el. URM hoist (s) |
Rastarivatelʹ big-beg cement RMK-2M |
STs-42 Cement Silo |
Pump Calpeda MXH 202E |
Pump PSTC 40-125/15 |
Aeration system silo SC |
Safety valve XD-YF250A with a setting ring |
Emergency pressure relief valve PV273 |
Cement level sensor G2 1/2 220V |
Butterfly valve DN300 with manual drive |
Vibrator MVE 300/3 |
RMK-2MP cement big bag grinder is designed for grinding cement big bag bags |
Cement filter with pneumatic cleaning AIRFILL25 |
On-site мобильный бетонный завод SMART-20 0.0-24 (2х12), capacity 20 m3 concrete per hour of work.
The plant is supplied already fully ready for use, does not require any makeready, checkout or foundation construction.
Installed in an open area, on any dense surface without preparation, or in any room with a ceiling height of at least 4 meters.
Start-up: connection to 380 V voltage supply and water feed. It takes less than two hours!
The principle of automatic operation:
- Инертные (песок, отсев, щебень и прочее), которые будут использоваться в производстве бетонараствора, распределяются по отсекам бункера инертных по наименованию. Количество бункеров равняется 2 шт. Таким же образом, распределяются по классу цемент в силосе, вода и добавочные вещества в расходные баки.
- After selection of a particular concrete formula, there needed to input the required volume (m3). After this the process of production starts.
- Inert materials are batched separately according to set weight. The batching is performed on the belt conveyor on which they are fed by opening of the hopper's gate.
- Batched inert materials are loaded into the mixer on this weigh belt conveyor.
- Cement, water and various chemical additives are fed to the corresponding dispensers where they are weighted according to the formula specified in the automation system.
- After dosing of all components of the concrete turns the solution through a metering valve fed into the mixer.
- Смесь из всех компонентов перемешивается в бетоносмесителе в течение определенного времени и в виде бетонараствора подается через сливной затвор смесителя.
BP-1G-500 single-shaft concrete mixer
Volume 500 liters. Positive concrete mixer with one horizontal shaft. 6 paddles for mixing. 11 kW drive. Rotation speed - 30 rot/min.
6 mm thick paddles made of wear-resistant cast iron, adjustable for gap aligning.
The armor is also made of wear-resistant cast iron 10 mm thick, replaceable, bolted. Warranty period until wear is at least 2 years or 40,000 cubic meters of concrete.
Unloading is carried out through a pneumatic gate
0.33 m is produced in one cycle3 concrete. The cycle lasts less than a minute. Thus 1m3 бетона производится за три минуты работы установки SMART-20 0.0-24 (2х12)
Dosing complex DKT-24S
It has a large capacity 24 m3 inert materials. These are two bunkers with a volume of 12 cubic.
Large loading width of the bunkers – 2,9 m
Not a high loading height 3,17 meters, does not require the manufacture of an additional ramp.
The conveyor is equipped with a smooth belt and a lined drum.
Weighing conveyor, on suspended strain gauges. Dosage error 1%. Conveyor drive power 7.5 kvt.
The hoppers are equipped with two pneumatic shutters and one vibrator and shaker.
BD-15 Block of Dispensers
It consists of three components: a cement dispenser, a water dispenser and a chemical additive dispenser.
The batcher of cement on 150 kg is supplied with the pneumatic gate, and the vibrator shaker. The weight dispenser is located on three load cells.
Weighing water dispenser for 75 liters, with three high-precision strain gauges.
Chemical dispenser made of stainless steel. The batcher of chemistry and water are supplied with the pneumatic valve for discharge of liquid.
The armored elements of the concrete mixer body are made of
Consists of a piston compressor and a pneumatic system. Capacity 500 liters per minute, power 3 kW. Pressure 11 atm. The compressor is already built into the frame.
PAM remote control
Work on the principle of pressing one button, select the brand of concrete - the amount of concrete and press the start of the cycle! Controller and touch graphic control panel.
Capacity 20 m3/hour of ready-mixed concrete (in case of continuous operation, with formulas with 2 aggregates and 1 binding agent(its maximum weight - 300 kg per 1 m3 of concrete), in case of normal flow characteristics, 5% sand moisture, 0.5 water/cement proportion, 30 seconds mixing time and above-zero temperature.
Discharge of ready mix into a bucket.
- Capacity 20 cu m per hour
- Ultra-mobile RBU, transportation in the first 20 foot container or a 5 ton truck
- Installed directly on site where the concrete is needed
- No foundation or skip pit needed
- Quick deployment and start-up - within 1 hour
- Software on its own SCADA system: accounting for the consumption of materials and equipment operation, remote access and control over the work
- 2 year full warranty
Technical Features
Quality
certificates
Products
in stock
Individual configuration
with prices for each item
Mobile
commissioning team
available
Worldwide
delivery
in trucks or containers
Call hotline in Kazakhstan
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: 010000, Kazakhstan, Akmola region,
Mr. Astana, prospekt Akzhol, building 44, of. 32
e-mail: sales@zzbo.ru
Artem Kononovich
Director of the branch in Kazakhstan
Phone: +7 (7172) 760-141
e-mail: sales@zzbo.kz
Place your order
We will send you the price,
conditions and terms of delivery
Response within 1 hour
You will get the offer with
individual delivery and payment conditions