Thermal oil boiler TEPLO KTM-1.5 is designed for heating thermal oil to a temperature of +300 °C with an excess pressure of up to 0.2 MPa. It is used to supply heat to technological processes for pumping bitumen and fuel oil using a coaxial pipeline (satellite heating of pipelines), heating bitumen and fuel oil tanks using closed registers, and are also used in the woodworking, petrochemical, metallurgical and light industries.

[parent] => 45 [count] => 6 [filter] => raw )

The operation of the oil heating station can be carried out (depending on the selected burner) on both gas and diesel fuel. Additionally, TEPLO KTM in diesel version can be equipped with a fuel tank with the volume required for autonomous operation of the unit at the Customer’s site.

[parent] => 45 [count] => 6 [filter] => raw )

Поставка термомасляного котла TEPLO КТМ возможна как в комплектации на раме (для установки внутри помещений), так и в утеплённом блок-контейнере (при размещении на открытом воздухе).

[parent] => 45 [count] => 6 [filter] => raw )

The automatic control mode makes it easy to start the boiler and reach rated production capacity in a short time.

[parent] => 45 [count] => 6 [filter] => raw )

Read more about KTM thermal oil boilers from TEPLO

Technical Features

• Thermal system, Gcal/time, (MW/time) 1,5(1,74)
• Efficiency, % not less 90
• The area of ​​the heat exchanger, m² 60
• The volume of the coolant, m³ 1,5
• Installed power, kW 25
• Power Power 3F, V/Hz Reject hopper capacity (at a density of 1.8 t/m³), m³ (t)
• Oil heating mode, feed/return, ° C 300/250
• Расход теплоносителя, м.куб/ч 100
• Расчётное давление котла, МПа 0,6
• Пробное давление котла, МПа 23 866 $
• Time to exit to mode, min 30
• Oil heating mode, supply / return, max, 10
• Diesel burner Baltur 1933
• Diesel consumption fuel, kg/hour 161
• Natural gas consumption, nm³/hour 206
• Length, m 7,4
• Width, m 2,4
• Working height (transport), m 6,3(2,55)
• Weight, kg 6,000
• Diesel burner Baltur U3.1
• Kinematic viscosity of isothermal oil at 40 ^OKinematic viscosity of isothermal oil at 40 Kinematic viscosity of isothermal oil at 40
• Kinematic viscosity of isothermal oil at 40 ^OKinematic viscosity of isothermal oil at 40 2…10
• Kinematic viscosity of isothermal oil at 40 ^O from “Bulgaria" 200
• Boiling point of isothermal oil in the open air, not less than, ^O from “Bulgaria" 300
• Boiling point of isothermal oil in the open air, not less than, ^O from “Bulgaria" 350
• Connection of branch pipes of supply and return flanged, mm Two-100
• Connection of branch pipes of supply and return flanged, mm Du-25
• Connection of branch pipes of supply and return flanged, mm Connection of branch pipes of supply and return flanged, mm
• The horizontal level of the expansion tank must be equal to or higher than the highest point of the entire heating line, as open type expansion tank