Products
Teplo CTM-2,0 heat-oil boiler
Pump High Temp
45 087 921 ₸
Profitable leasing from 12%
Worldwide shipping
2-year warranty
Plant passport, PDF Enquire conditions
and delivery time
We'll call you back within 15 minutes
Specify your requirements
Send prices and terms of delivery
| Термомасляный котёл с теплообменником в виде многоходовой спирали выполненной из горячекатаной трубы ДУ 100, сталь 09Г2С, с теплоизоляцией корпуса, обшитый нержавеющим листом с зеркальной поверхностью |
|
Высокотемпературный насос LQRYN 100-65-240/2-C для циркуляции теплоносителя в магистрали «котёл-потребитель». Макс. темп. жидкости 300 °C. Мощность 30 кВт |
| Преобразователь частоты (ПЧТ) для плавного запуска циркуляционного насоса и регулировки оборотов |
| Oil injection pump |
| Vibration-resistant pressure gauges for visual monitoring of pressure on the boiler flow and return lines |
| Thermal resistance for controlling the heating modes of the coolant on the boiler supply and return lines and at the flue gas outlet |
| Mechanical pressure switch to turn off the pump when the permissible pressure is exceeded |
| Differential pressure switch to protect the circulation pump from “dry running” |
| Pressure meter for visual monitoring of pressure in the furnace |
|
A control panel with a “Thermodat-11M6” regulator, with automatic heating of the oil according to specified temperature settings and selection of operating modes (“Heating”, “Stop”, “Circulation”), automatic shutdown of the boiler when the pressure is exceeded, burner failure in an IP54 enclosure. Adjustment of the coolant temperature using an on-off or proportional-integral differential (PID) control law to accurately maintain the set parameters (Option available when working with a modulating burner) |
| Shut-off valves: Wedge gate valves type 30S41NZH |
| Degasser for removing gases and air from the coolant |
| Сэндвич-дымоход котла ДУ 500 высотой 6,5 м. из нержавеющей стали с утеплением толщиной 50 мм. |
| Passport and Manual |
| Горелка газовая TBG 260 MC |
| Gas fitting MM20.503 A120C-R2 |
| Аксиальный компенсатор BTGA 2" |
| Maximum pressure switch |
| Горелка дизельная TBL 260P |
| Fitting kit for diesel burner |
| Форсунка 22,00х45В |
| Форсунка 22,00х45 SS |
| Thermal insulation of shut-off valves |
| Control panel based on the Segnetics SMH4 controller with a touch screen - a single control interface: programmable operating algorithms, advanced monitoring and diagnostic functions with a detailed event log. Intelligent control with centralized parameter setting and the ability to integrate into larger automation systems. Protection degree IP54, climatic version UHL-4. |
| Expansion tank 0.4 cubic meters |
| Expansion tank 1.0 cubic meters |
| Expansion tank 1.5 cubic meters |
| Expansion tank 2.0 cubic meters |
| Expansion tank 3.0 cubic meters |
| Rest of expansion tank ERB-6 |
| Diesel fuel tank BDT-0.6 |
| Tank for diesel fuel BDT-1 |
| Diesel fuel tank BDT-5 |
| Diesel fuel tank BDT-7 |
| Tank for diesel fuel BDT-10 |
| Tank for diesel fuel BDT-25 |
Термомасляный котёл TEPLO КТМ-2,0 предназначен для нагрева термального масла до температуры +300 °С с избыточным давлением до 0,2 МПа. Служит для теплоснабжения технологических процессов по перекачке битума, мазута с использованием коаксиального трубопровода (спутниковый обогрев трубопроводов), прогрева битумных и мазутных ёмкостей посредством закрытых регистров, а также используются в сферах деревообрабатывающей, нефтехимической, металлургической и легкой промышленности.
[parent] => 45 [count] => 6 [filter] => raw )
The operation of the oil heating station can be carried out (depending on the selected burner) on both gas and diesel fuel. Additionally, TEPLO KTM in diesel version can be equipped with a fuel tank with the volume required for autonomous operation of the unit at the Customer’s site.
[parent] => 45 [count] => 6 [filter] => raw )
Поставка термомасляного котла TEPLO КТМ возможна как в комплектации на раме (для установки внутри помещений), так и в утеплённом блок-контейнере (при размещении на открытом воздухе).
[parent] => 45 [count] => 6 [filter] => raw )
The automatic control mode makes it easy to start the boiler and reach rated production capacity in a short time.
[parent] => 45 [count] => 6 [filter] => raw )
Read more about KTM thermal oil boilers from TEPLO
The price for the thermal center is presented without a burner
- Not subject to registration with Rostekhnadzor
- Italian components (BALTUR or F.B.R. burners, valves, safety valves, pumps)
- Automatic control
- Mobile installation, completely autonomous
- Casing stainless steel boiler
- Transport dimensions
- 2-year warranty
Technical Features
- Thermal system, Gcal/time, MW/time 2,0(2,32)
- Efficiency, % not less 90
- The area of the heat exchanger, m2 110
- The volume of the coolant, m3 2,5
- Installed power, kW 36
- Power Power 3F, V/Hz Reject hopper capacity (at a density of 1.8 t/m³), m³ (t)
- Oil heating mode, feed/return, ° C 300/250
- Time to exit to mode, min 30
- Oil heating mode, supply / return, max, 10
- Diesel burner Baltur 2580
- Diesel consumption fuel, kg/hour 215
- Natural gas consumption, nm3/hour 274
- Length, m 8
- Width, m 2,3
- Working height (transport), m 6,4(2,55)
- Weight, kg 9,000
- Diesel burner Baltur U3.1
- Kinematic viscosity of isothermal oil at 40 OKinematic viscosity of isothermal oil at 40 Kinematic viscosity of isothermal oil at 40
- Kinematic viscosity of isothermal oil at 40 OKinematic viscosity of isothermal oil at 40 2…10
- Kinematic viscosity of isothermal oil at 40 O from “Bulgaria" 200
- Boiling point of isothermal oil in the open air, not less than, O from “Bulgaria" 300
- Boiling point of isothermal oil in the open air, not less than, O from “Bulgaria" 350
- Connection of branch pipes of supply and return flanged, mm Ду-125
- Connection of branch pipes of supply and return flanged, mm Du-25
- Connection of branch pipes of supply and return flanged, mm Connection of branch pipes of supply and return flanged, mm
- The horizontal level of the expansion tank must be equal to or higher than the highest point of the entire heating line, as open type expansion tank
Quality
certificates
Products
in stock
Individual configuration
with prices for each item
Mobile
commissioning
available
Worldwide
delivery
in trucks or containers
Geography of supplies 2011-2026
Own production, in-stock products and
professional team allow us guarantee
most competitive prices, shortest
possible delivery time and high-quality goods
Call hotline in Kazakhstan
Our managers will answer all your questions from Monday till Friday:
from 06:00 a.m. to 05:00 p.m. (GMT+3, Moscow time)
Address: 010000, Kazakhstan, Akmola region,
г. Astana, prospekt Akžol, Zdanie 44, of. 32
e-mail: sales@zzbo.kz
Place your order
We will send you the price,
conditions and terms of delivery
Response within 1 hour
You will get the offer with
individual delivery and payment conditions
