Теплогенератор TEPLO ТГМ-300 для отопления применяется для обогрева производственных помещений, промышленных объектов и участия в технологических процессах сушки. Основан на принципе подаче горячего воздуха температурой до 80^TheC. It is possible to work both with and without an air duct system.

Теплогенератор подает нагретый воздух с температурой не более 80^TheС под давлением до 50 Па. Тепловая мощность установки 300 кВт. Установка снабжена тепловой пушкой для пускового отогрева горелки в зимний период эксплуатации.

The installation uses indirect heating, in which heat from the flue gases is transferred to the air through the firebox wall and heat exchanger pipes. The heat generator consists of burners Italian production (Baltur or F.B.R.), fan, firebox, heat exchanger, aluminum damper, control panel and automation. The heat exchanger is made of stainless steel.

The diesel heat generator can additionally be equipped with a fuel tank (with the volume required by the Customer), which will ensure autonomous operation of the unit for a long time.

TEPLO ТГМ-300 для отопления выполнен в климатическом исполнении У-2 с температурой эксплуатации от -45 до +40°С.

The heat source is used in electrified areas (optional can work in standalone mode).

СИСТЕМЫ АВТОМАТИЗАЦИИ И УПРАВЛЕНИЯ ТЕПЛОГЕНЕРАТОРА TEPLO ТГМ-300

[parent] => 45 [count] => 6 [filter] => raw )

Automation and intelligent control: The Termodat-11M6 temperature controller is used, which ensures high control accuracy and flexibility of settings. Support for PID controllers for the temperature in the duct and in the furnace, which allows you to accurately maintain the set parameters.

[parent] => 45 [count] => 6 [filter] => raw )

Real time display: temperatures in the duct, heat exchanger, room; fan current;

[parent] => 45 [count] => 6 [filter] => raw )

Protection and diagnostics: Developed alarm system (fan overheating, housing overheating, burner failure). Heat exchanger temperature control and automatic burner shutdown when overheated.

[parent] => 45 [count] => 6 [filter] => raw )

Energy efficiency: Using air recirculation to maintain temperature without constantly running the burner.

[parent] => 45 [count] => 6 [filter] => raw )

Reliability and protection: Shell protection degree IP54 - suitable for work in a workshop or under a canopy. Protection against overloads, overheating, phase asymmetry.

Optional:

Data archive - recording up to 1 million points with time reference.

RS485 interface - support for Modbus ASCII/RTU protocols, connection to PC, SCADA systems.

Possibility of settings: PID parameters; temperature settings; minimum and maximum burner power (1-2 stages); fan rotation speed; access to settings is protected from unauthorized access;

Adjusts burner power and fan speed depending on temperature, reducing energy consumption.

More information about TEPLO heat generators

The price for the thermal center is presented without a burner

Technical Features

• Thermal power, kW 300
• Расход воздуха на выходе ТГВ, м³/hour 10000-20000
• Напор на выходе из установки, Па 50
• The pressure fan Pa 200
• Температура воздуха на выходе не более, °С 90
• Time to reach operating mode, no more, min 15
• Расход газа макс., нм³/hour 8..35
• Расход дизеля макс., кг/ч 10…34
• KPD 90%
• Установленная электрическая мощность (1ф, 230В, 50Гц), кВт 2,5
• Operating temperature, °C -45...40
• Weight, kg 1800
• Length*, mm 2100
• Width*, mm 1,700
• Height*, mm 1,700
• *Transport dimensions