Теплогенератор TEPLO ТГВ-600 для отопления применяется для обогрева производственных помещений, промышленных объектов и участия в технологических процессах сушки. Основан на принципе подаче горячего воздуха температурой до 110 ^TheС. Возможна работа как с системой воздуховодов, так и без них.

Теплогенератор подает нагретый воздух с температурой не более 110^TheС под давлением до 1500 Па. Тепловая мощность установки 600 кВт. Установка снабжена тепловой пушкой для пускового отогрева горелки в зимний период эксплуатации.

The installation uses indirect heating, in which heat from the flue gases is transferred to the air through the firebox wall and heat exchanger pipes. The heat generator consists of burners Italian made (Baltur or F.B.R.), high pressure fan, firebox, heat exchanger, control panel and automation. The heat exchanger and combustion chamber are made of stainless steel.

The diesel heat generator can additionally be equipped with a fuel tank (with the volume required by the Customer), which will ensure autonomous operation of the unit for a long time.

Опционально поставляются воздуховоды для подключения теплогенератора к системе воздуховодов.

The heat source is used in electrified areas (optional can work in standalone mode).

СИСТЕМЫ АВТОМАТИЗАЦИИ И УПРАВЛЕНИЯ ТЕПЛОГЕНЕРАТОРА TEPLO ТГВО-600

[parent] => 45 [count] => 6 [filter] => raw )

Automation and intelligent control: The Termodat-11M6 temperature controller is used, which ensures high control accuracy and flexibility of settings. Support for PID controllers for the temperature in the duct and in the furnace, which allows you to accurately maintain the set parameters.

[parent] => 45 [count] => 6 [filter] => raw )

Real time display: temperatures in the duct, heat exchanger, room; fan current;

[parent] => 45 [count] => 6 [filter] => raw )

Protection and diagnostics: Developed alarm system (fan overheating, housing overheating, burner failure). Heat exchanger temperature control and automatic burner shutdown when overheated.

[parent] => 45 [count] => 6 [filter] => raw )

Energy efficiency: Using air recirculation to maintain temperature without constantly running the burner.

[parent] => 45 [count] => 6 [filter] => raw )

Reliability and protection: Shell protection degree IP54 - suitable for work in a workshop or under a canopy. Protection against overloads, overheating, phase asymmetry.

Optional:

Data archive - recording up to 1 million points with time reference.

RS485 interface - support for Modbus ASCII/RTU protocols, connection to PC, SCADA systems.

Possibility of settings: PID parameters; temperature settings; minimum and maximum burner power (1-2 stages); fan rotation speed; access to settings is protected from unauthorized access;

Adjusts burner power and fan speed depending on temperature, reducing energy consumption.

[parent] => 45 [count] => 6 [filter] => raw )

More information about TEPLO heat generators

The price for the thermal center is presented without a burner

Technical Features

• Thermal power, kW 600
• Outlet air flow up to, m³/hour 10000-28000
• Air pressure at the outlet of the DVT, no more than, Pa 900-1300
• Air heating delta, °C 70
• Maximum outlet air temperature, °C 110
• Time to reach operating mode, no more, min 7
• Gas pressure for heat generator, mbar individually
• DF consumption (no more), kg/h (l/h) 56(67)
• Gas consumption (no more), nm.cub/h 71
• KPD% 90
• Current source 3 f. 220/380V, 50 Hz
• Installed power, kW 25
• Operating temperature, °C from -45 to +40
• Weight, kg 3,900
• Length*, mm 7000
• Width*, mm 2350
• Height*, mm 2580
• *Transport dimensions