Vibropress KS 2.0 – equipment for the production of well rings in accordance with GOST 8020-90. Standard sizes KS7, KS10, KS13, KS15 and KS20 – different heights with a “docking lock”.

Vibropress KS 2.0 – works using the technology of vibrocompression of rigid concrete mixture with subsequent stripping. Vibropress CS 2.0 It can work as a separate unit or as part of a fully automated line.

Performance vibropress manual 7…10 rings per hour work, as part of an automated line up to 15 rings per hour.

Vibropress versatile and allows you to switch from one size to another with minimal reconfiguration of equipment.

The rotating beam with the troweling punch moves along a radius of 90 degrees along the rail track. The rotating beam is secured by a hydraulic cylinder. At the working moment of production, the punch is located above the mold, and when stripping the formwork it is moved to the side.

The grouting ring allows you to obtain a flat upper surface of the ring, the movement of which is carried out using two hydraulic cylinders, and also forms a “docking lock”.

Vibrating table compiled on the basis vybratorov total power 6.4 kW. The vibrating table is equipped with a multi-amplitude vibration option - during the production of KS7, KS10, KS15 and KS20 products, the operator reconfigures the operation of the vibrating table to a different disturbing force.

Vibration table is mounted on a flat area and does not require production of the pit.

Technical Features

• Size of products KS7, KS10, KS13, COP15, KS20
• The disturbing force, kN 64
• Power vibration table, kW 6,4
• different frequency vibration option
• Installed power, kW 10,4
• the molding cycle time, s 60...180
• The number of moldings per hour, pieces 7...15
• Hydraulic pressure, MPa 7...12
• Supply voltage, V/Hz Reject hopper capacity (at a density of 1.8 t/m³), m³ (t)
• The staff, the person 2
• mode semi-automatic
• Length, mm 5288
• Width, mm 4990
• Height, mm 2906
• Weight, kg 3,000